Standard Chinese

About the course This course is designed to give you a practical command of spoken Standard Chinese. You will learn both to understand and to speak it. Although Standard Chinese is one language, there are differences between the particular form it takes in Beijing and the form it takes in the rest of the country. There are also, of course, significant non-linguistic differences between regions of the country. Reflecting these regional differences, the settings for most conversations are Beijing and Taipei. This course represents a new approach to the teaching of foreign languages. In many ways it redefines the roles of teacher and student, of classwork and homework, and of text and tape. Here is what you should expect: The focus is on communicating in Chinese in practical situations—the obvious ones you will encounter upon arriving in China. You will be communicating in Chinese most of the time you are in class. You will not always be talking about real situations, but you will almost always be purposefully exchanging information in Chinese. This focus on communicating means that the teacher is first of all your conversational partner. Anything that forces him As used in this course, the words “he,” “him,” and “Ms” are intended to include both masculine and feminine genders. (Translations of foreign language material not included.) back into the traditional roles of lecturer and drill-master limits your opportunity to interact with a speaker of the Chinese language and to experience the language in its full spontaneity, flexibility, and responsiveness. Using class time for communicating, you will complete other course activities out of class whenever possible. This is what the tapes are for. They introduce the new material of each unit and give you as much additional practice as possible without a conversational partner. The texts summarize and supplement the tapes, which take you through new material step by step and then give you intensive practice on what you have covered. In this course you will spend almost all your time listening to Chinese and saying things in Chinese, either with the tapes or in class. How the Course Is Organized The subtitle of this course, “A Modular Approach,” refers to overall organization of the materials into MODULES which focus on particular situations or language topics and which allow a certain amount of choice as to what is taught and in what order. To highlight equally significant features of the course, the subtitle could just as well have been “A Situational Approach,” “A Taped-Input Approach,” or “A Communicative Approach.” Ten situational modules form the core of the course: ORIENTATION (ORN) Talking about who you are and where you are from. BIOGRAPHIC INFORMATION (BIO) Talking about your background, family, studies, and occupation and about your visit to China. MONEY (MON) Making purchases and changing money. DIRECTIONS (DIR) Asking directions in a city or in a building. TRANSPORTATION (TRN) Taking buses, taxis, trains, and planes, including finding out schedule information, buying tickets, and making reservations. ARRANGING A MEETING (MTG) Arranging a business meeting or a social get-together, changing the time of an appointment, and declining an invitation. SOCIETY (SOC) Talking about families, relationships between people, cultural roles in traditional society, and cultural trends in modern society. TRAVELING IN CHINA (TRL) Making travel arrangements and visiting a kindergarten, the Great Wall, the Ming Tombs, a commune, and a factory. LIFE IH CHINA (LIC) Talking about daily life in Běijīng street committees, leisure activities, traffic and transportation, buying and rationing, housing. TALKING ABOUT THE NEWS (TAN) Talking about government and party policy changes described in newspapers the educational system agricultural policy, international policy, ideological policy, and policy in the arts. Each core module consists of tapes, a student textbook, and a workbook. In addition to the ten CORE modules, there are also RESOURCE modules and OPTIONAL modules. Resource modules teach particular systems in the language, such as numbers and dates. As you proceed through a situational core module, you will occasionally take time out to study part of a resource module. (You will begin the first three of these while studying the Orientation Module.) PRONUNCIATION AND ROMANIZATION (P&R) The sound system of Chinese and the Pinyin system of romanization. NUMBERS (NUM) Numbers up to five digits. CLASSROOM EXPRESSIONS (CE) Expressions basic to the classroom learning situation. TIME AND DATES (T&D) Dates, days of the week, clock time, parts of the day. GRAMMAR Aspect and verb types, word order, multisyllabic verbs and auxiliary verbs, complex sentences, adverbial expressions. Each module consists of tapes and a student textbook. The eight optional modules focus on particular situations: RESTAURANT (RST) HOTEL (HTL) PERSONAL WELFARE (WLF) POST OFFICE AND TELEPHONE (PST/TEL) CAR (CAR) CUSTOMS SURROUNDING MARRIAGE, BIRTH, MD DEATH (MBD) NEW YEAR’S CELEBRATION (NYR) INSTITUTIONS AND ORGANIZATIONS (I&O) Each module consists of tapes and a student textbook. These optional modules may be used at any time after certain core modules, The diagram on page shows how the core modules, optional modules, and resource modules fit together in the course. Resource modules are shown where study should begin. Optional modules are shown where they may be introduced. Inside a Core Module Each core module has from four to eight units. A module also includes: Objectives: The module objectives are listed at the beginning of the text for each module. Read these before starting work on the first unit to fix in your mind what you are trying to accomplish and what you will have to do to pass the test at the end of the module. Target Lists: These follow the objectives in the text. They summarize the language content of each unit in the form of typical questions and answers on the topic of that unit. Each sentence is given both in romanized Chinese and in English. Turn to the appropriate Target List before, during, or after your work on a unit, whenever you need to pull together what is in the unit. Review Tapes (R-l): The Target List sentences are given on these tapes. Except in the short Orientation Module, there are two R-l tapes for each module. Criterion Test: After studying each module, you will take a Criterion Test to find out which module objectives you have met and which you need to work on before beginning to study another module. Inside a Unit Here is what you will be doing in each unit. First, you will work through two tapes: Comprehension Tape 1 (C-1): This tape introduces all the new words and structures in the unit and lets you hear them in the context of short conversational exchanges. It then works them into other short conversations and longer passages for listening practice, and finally reviews them in the Target List sentences. Your goal when using the tape is to understand all the Target List sentences for the unit. Production Tape 1 (P-1): This tape gives you practice in pronouncing the new words and in saying the sentences you learned to understand on the C-1 tape. Your goal when using the P-1 tape is to be able to produce any of the Target List sentences in Chinese when given the English equivalent. The C-1 and P-1 tapes, not accompanied by workbooks, are “portable,” in the sense that they do not tie you down to your desk. However, there are some written materials for each unit which you will need to work into your study routine. A text Reference List at the beginning of each unit contains the sentences from the C-1 and P-1 tapes. It includes both the Chinese sentences and their English equivalents. The text Reference Notes restate and expand the comments made on the C-1 and P-1 tapes concerning grammar, vocabulary, pronunciation, and culture. After you have worked with the C-1 and P-1 tapes, you go on to two class activities: Target List Review: In this first class activity of the unit, you find out how well you learned the C-1 and P-1 sentences. The teacher checks your understanding and production of the Target List sentences. He also presents any additional required vocabulary items, found at the end of the Target List, which were not on the C-1 and P-1 tapes. Structural Buildup: During this class activity, you work on your understanding and control of the new structures in the unit. You respond to questions from your teacher about situations illustrated on a chalkboard or explained in other ways. After these activities, your teacher may want you to spend some time working on the drills for the unit. Drill Tape: This tape takes you through various types of drills based on the Target List sentences and on the additional required vocabulary. Drills: The teacher may have you go over some or all of the drills in class, either to prepare for work with the tape, to review the tape, or to replace it. Next, you use two more tapes. These tapes will give you as much additional practice as possible outside of class. Comprehension Tape 2 (C-2): This tape provides advanced listening practice with exercises containing long, varied passages which fully exploit the possibilities of the material covered. In the C-2 Workbook you answer questions about the passages. Production Tape 2 (P-2): This tape resembles the Structural Buildup in that you practice using the new structures of the unit in various situations. The P-2 Workbook provides instructions and displays of information for each exercise. Following work on these two tapes, you take part in two class activities: Exercise Review: The teacher reviews the exercises of the C-2 tape by reading or playing passages from the tape and questioning you on them. He reviews the exercises of the P-2 tape by questioning you on information displays in the P-2 Workbook. Communication Activities: Here you use what you have learned in the unit for the purposeful exchange of information. Both fictitious situations (in Communication Games) and real-world situations involving you and your classmates (in "interviews") are used. Materials and Activities for a Unit TAPED MATERIALS WRITTEN MATERIALS CLASS ACTIVITIES C-1, P-1 Tapes Target List Reference List Reference Notes Target List Review ——————- ——————- Structural Buildup D-1 Tapes Drills Drills C-2, P-2 Tapes Reference Notes C-2, P-2 Workbooks Exercise Review ——————- ——————- Communication Activities

<foreignphrase xml:lang="cmn-Latn-pinyin">Wén wǔ</foreignphrase> Temple in central Taiwan (courtesy of Thomas Madden) By Photo by CEphoto, Uwe Aranas or alternatively © CEphoto, Uwe Aranas, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=51438668

Background Notes: About Chinese The Chinese Languages We find it perfectly natural to talk about a language called “Chinese.” We say, for example, that the people of China speak different dialects of Chinese, and that Confucius wrote in an ancient form of Chinese. On the other hand, we would never think of saying that the people of Italy, France, Spain, and Portugal speak dialects of one language, and that Julius Caesar wrote in an ancient form of that language. But the facts are almost exactly parallel. Therefore, in terms of what we think of as a language when closer to home, “Chinese” is not one language, but a family of languages. The language of Confucius is partway up the trunk of the family tree. Like Latin, it lived on as a literary language long after its death as a spoken language in popular use. The seven modern languages of China, traditionally known as the “dialects,” are the branches of the tree. They share as strong a family resemblance as do Italian, French, Spanish, and Portuguese, and are about as different from one another. The predominant language of China is now known as Pǔtōnghuà, or “Standard Chinese” (literally “the common speech”). The more traditional term, still used in Taiwan, is Guóyǔ, or “Mandarin” (literally “the national language”). Standard Chinese is spoken natively by almost two-thirds of the population of China and throughout the greater part of the country. The term “Standard Chinese” is often used more narrowly to refer to the true national language which is emerging. This language, which is already the language of all national broadcasting, is based primarily on the Peking dialect, but takes in elements from other dialects of Standard Chinese and even from other Chinese languages. Like many national languages, it is more widely understood than spoken, and is often spoken with some concessions to local speech, particularly in pronunciation. The Chinese languages and their dialects differ far more in pronunciation than in grammar and vocabulary. What distinguishes Standard Chinese most from the other Chinese languages, for example, is that it has the fewest tones and the fewest final consonants. The remaining six Chinese languages, spoken by approximately a quarter of the population of China, are tightly grouped in the southeast, below the Yangtze River. The six are: the Wu group (Wú), which includes the “Shanghai dialect”; Hunanese (Xiāng); the “Kiangsi dialect” (Gàn); Cantonese (Yuè), the language of Guǎngdōng, widely spoken in Chinese communities in the United States; Fukienese (Mǐn), a variant of which is spoken by a majority on Taiwan and hence called Taiwanese; and Hakka (Kèjiā), spoken in a belt above the Cantonese area, as well as by a minority on Taiwan. Cantonese, Fukienese, and Hakka are also widely spoken throughout Southeast Asia. There are minority ethnic groups in China who speak non-Chinese languages. Some of these, such as Tibetan, are distantly related to the Chinese languages. Others, such as Mongolian, are entirely unrelated. Some Characteristics of Chinese To us, perhaps the roost striking feature of spoken Chinese is the use of variation in tone (“tones” to distinguish the different meanings of syllables which would otherwise sound alike. All languages, and Chinese is no exception, make use of sentence intonation to indicate how whole sentences are to be understood. In English, for example, the rising pattern in “He’s gone?” tells us that the sentence is meant as a question. The Chinese tones, however, are quite a different matter. They belong to individual syllables, not to the sentence as a whole. An inherent part of each Standard Chinese syllable is one of four distinctive tones. The tone does just as much to distinguish the syllable as do the consonants and vowels. For example, the only difference between the verb “to buy,” mǎi and the verb “to sell,” mài, is the Low tone (ˇ̆) and the Falling tone (`). And yet these words are Just as distinguishable as our words “buy” and “guy,” or “buy” and “boy.” Apart from the tones, the sound system of Standard Chinese is no more different from English than French is. Word formation in Standard Chinese is relatively simple. For one thing, there are no conjugations such as are found in many European languages. Chinese verbs have fewer forms than English verbs, and nowhere near as many irregularities. Chinese grammar relies heavily on word order, and often the word order is the same as in English. For these reasons Chinese is not as difficult for Americans to learn to speak as one might think. It is often said that Chinese is a monosyllabic language. This notion contains a good deal of truth. It has been found that, on the average, every other word in ordinary conversation is a single-syllable word. Moreover, although most words in the dictionary have two syllables, and some have more, these words can almost always be broken down into single-syllable units of meaning, many of which can stand alone as words. Written Chinese Most languages with which we are familiar are written with an alphabet. The letters may be different from ours, as in the Greek alphabet, but the principle is the same: one letter for each consonant or vowel sound, more or less. Chinese, however, is written with “characters” which stand for whole syllables—in fact, for whole syllables with particular meanings. Although there are only about thirteen hundred phonetically distinct syllables in standard Chinese, there are several thousand Chinese characters in everyday use, essentially one for each single-syllable unit of meaning. This means that many words have the same pronunciation but are written with different characters, as tiān, “sky,” 天, and tiān, “to add,” “to increase,” 添. Chinese characters are often referred to as “ideographs” which suggests that they stand directly for ideas. But this is misleading. It is better to think of them as standing for the meaningful syllables of the spoken language. Minimal literacy in Chinese calls for knowing about a thousand characters. These thousand characters, in combination, give a reading vocabulary of several thousand words. Full literacy calls for knowing some three thousand characters. In order to reduce the amount of time needed to learn characters, there has been a vast extension in the People’s Republic of China (PRC) of the principle of character simplification, which has reduced the average number of strokes per character by half. During the past century, various systems have been proposed for representing the sounds of Chinese with letters of the Roman alphabet. One of these romanizations, Hànyǔ Pīnyīn (literally “Chinese Language Spelling,” generally called “Pinyin” in English), has been adopted officially in the PRC, with the short-term goal of teaching all students the Standard Chinese pronunciation of characters. A long-range goal is the use of Pinyin for written communication throughout the country. This is not possible, of course, until speakers across the nation have uniform pronunciations of Standard Chinese. For the time being, characters, which represent meaning, not pronunciation, are still the most widely accepted way of communicating in writing. Pinyin uses all of the letters in our alphabet except “v,” and adds the letter “ü.” The spellings of some of the consonant sounds are rather arbitrary from our point of view, but for every consonant sound there is only one letter or one combination of letters, and vice versa. You will find that each vowel letter can stand for different vowel sounds, depending on what letters precede or follow it in the syllable. The four tones are indicated by accent marks over the vowels, and the Neutral tone by the absence of an accent mark: High: mā Falling: mà Rising: má Neutral: ma Low: mǎ One reason often given for the retention of characters is that they can be read, with the local pronunciation, by speakers of all the Chinese languages. Probably a stronger reason for retaining them is that the characters help keep alive distinctions of meaning between words, and connections of meaning between words, which are fading in the spoken language. On the other hand, a Cantonese could learn to speak Standard Chinese, and read it alphabetically, at least as easily as he can learn several thousand characters. Pinyin is used throughout this course to provide a simple written representation of pronunciation. The characters, which are chiefly responsible for the reputation of Chinese as a difficult language, are taught separately. BACKGROUND NOTES: ABOUT CHINESE CHARACTERS Each Chinese character is written as a fixed sequence of strokes. There are very few basic types of strokes, each with its own prescribed direction, length, and contour. The dynamics of these strokes as written with a brush, the classical writing instrument, show up clearly even in printed characters. You can tell from the varying thickness of the stroke how the brush met the paper, how it swooped, and how it lifted; these effects are largely lost in characters written with a ball-point pen. The sequence of strokes is of particular importance. Let’s take the character for “mouth,” pronounced kǒu. Here it is as normally written, with the order and directions of the strokes indicated.

Strokes order If the character is written rapidly, in “running-style writing,” one stroke glides into the next, like this.

Running style writing If the strokes were written in any but the proper order, quite different distortions would take place as each stroke reflected the last and anticipated the next, and the character would be illegible. The earliest surviving Chinese characters, inscribed on the Shang Dynasty “oracle bones” of about 1500 B.C. , already included characters that vent beyond simple pictorial representation. There are some characters in use today which are pictorial, like the character for “mouth.” There are also some which are directly symbolic, like our Roman numerals I, II, and III. (The characters for these numbers—the first numbers you learn in this course—are like the Roman numerals turned on their sides.) There are some which are indirectly symbolic, like our Arabic numerals 1, 2, and 3. But the most common type of character is complex, consisting of two parts: a “phonetic,” which suggests the pronunciation, and a “radical,” which broadly characterizes the meaning. Let’s take the following character as an example.

Running style writing This character means “ocean” and is pronounced yáng. The left side of the character, the three short strokes, is an abbreviation of a character which means “water” and is pronounced shuǐ. This is the “radical.” It has been borrowed only for its meaning, "water.” The right side of the character above is a character which means "sheep” and is pronounced xml:lang="cmn-Latn-pinyin">yáng. This is the “phonetic.” It has been borrowed only for its sound value, yáng. A speaker of Chinese encountering the above character for the first time could probably figure out that the only Chinese word that sounds like yáng and means something like “water,” is the word yáng meaning “ocean,” We, as speakers of English, might not be able to figure it out. Moreover, phonetics and radicals seldom work as neatly as in this example. But we can still learn to make good use of these hints at sound and sense. Many dictionaries classify characters in terms of the radicals. According to one of the two dictionary systems used, there are 176 radicals; in the other system, there are 214. There are over a thousand phonetics. Chinese has traditionally been written vertically, from top to bottom of the page, starting on the right-hand side, with the pages bound so that the first page is where we would expect the last page to be. Nowadays, however, many Chinese publications paginate like Western publications, and the characters are written horizontally, from left to right. BACKGROUND NOTES: ABOUT CHINESE PERSONAL NAMES AND TITLES A Chinese personal name consists of two parts: a surname and a given name. There is no middle name. The order is the reverse of ours: surname first, given name last. The most common pattern for Chinese names is a single-syllable surname followed by a two-syllable given name: The first version of each example is in the Pinyin system of romanization. The second parenthesized version is the conventional, or anglicized, spelling. Máo Zédōng (Mao Tse-tung) Zhōu Ēnlái (Chou En-lai) Jiǎng Jièshí (Chiang Kai-shek) Sòng Qìnglíng (Soong Chʽing-ling—Mme Sun Yat-sen) Sòng Měilíng (Soong Mei-ling—Mme Chiang Kai-shek) It is not uncommon, however, for the given name to consist of a single syllable: Zhū Dé (Chu De) : Marshal Zhu De, the communist general 朱德 Lín Biāo (Lin Piao) Hú Shì (Hu Shih) Jiāng Qīng (Chiang Chʽing—Mme Mao Tse-tung) There are a few two-syllable surnames. These are usually followed by single-syllable given names: Sīmǎ Guāng (Ssu-ma Kuang) Ōuyáng Xiū (Ou-yang Hsiu) Zhūgě Liàng (Chu-ke Liang) But two-syllable surnames may also be followed by two-syllable given names: Sīmǎ Xiāngrú (Ssu-ma Hsiang-ju) An exhaustive list of Chinese surnames includes several hundred written with a single character and several dozen written with two characters. Some single-syllable surnames sound exactly alike although written with different characters, and to distinguish them, the Chinese nay occasionally have to describe the character or “write” it with a finger on the palm of a hand. But the surnames that you are likely to encounter are fever than a hundred, and a handful of these are so common that they account for a good majority of China’s population. Given names, as opposed to surnames, are not restricted to a limited list of characters, Men’s names are often but not always distinguishable from women’s; the difference, however, usually lies in the meaning of the characters and so is not readily apparent to the beginning student with a limited knowledge of characters. Outside the People’s Republic the traditional system of titles is still in use. These titles closely parallel our own “Mr.,” “Mrs.,” and “Miss.” Notice, however, that all Chinese titles follow the name—either the full name or the surname alone—rather than preceding it. The title “Mr.” is Xiānsheng. Mǎ Xiānsheng Mǎ Mínglǐ Xiānsheng The title “Mrs.” is Tàitai. It follows the husband’s full name or surname alone. Mǎ Tàitai Mǎ Mínglǐ Tàitai The title “Miss” is Xiǎojiě. The Ma family’s grown daughter, Défēn, would be Mǎ Xiǎojiě Mǎ Défēn Xiǎojiě Even traditionally, outside the People’s Republic, a married woman does not take her husband’s name in the same sense as in our culture. If Miss Fang Bǎolán marries Mr. Ma Mínglǐ, she becomes Mrs, Mǎ Mínglǐ, but at the same time she remains Fāng Bǎolán, She does not become Mǎ Bǎolán; there is no equivalent of “Mrs. Mary Smith.” She may, however, add her husband’s surname to her own full name and refer to herself as Mǎ Fāng Bǎolán. At work she is quite likely to continue as Miss Fāng. These customs regarding names are still observed by many Chinese today in various parts of the world. The titles carry certain connotations, however, when used in the PRC today: Tàitai should not be used because it designates that woman as a member of the leisure class. Xiǎojiě should not be used because it carries the connotation of being from a rich family. In the People’s Republic, the title “Comrade,” Tóngzhì is used in place of the titles Xiānsheng, Tàitai, and Xiǎojiě. Mǎ Mínglǐ would be: Mǎ Tóngzhì Mǎ Mínglǐ Tóngzhì The title “Comrade” is applied to all, regardless of sex or marital status. A married woman does not take her husband’s name in any sense. Mǎ Mínglǐ’s wife would be: Fāng Tóngzhì Fāng Bǎolán Tóngzhì Children may be given either the mother’s or the father’s surname at birth. In some families one child has the father’s surname, and another child has the mother’s surname. Mǎ Mínglǐ’s and Fāng Bǎolán’s grown daughter could be Mǎ Tŏngzhì Mǎ Děfēn Tóngzhì Their grown son could be Fāng Tóngzhì Fāng Zìqiáng Tóngzhì Both in the PRC and elsewhere, of course, there are official titles and titles of respect in addition to the common titles we have discussed here. Several of these will be introduced later in the course. The question of adapting foreign names to Chinese calls for special consideration. In the People’s Republic the policy is to assign Chinese phonetic equivalents to foreign names. These approximations are often not as close phonetically as they might be, since the choice of appropriate written characters may bring in non-phonetic considerations. (An attempt is usually made when transliterating to use characters with attractive meanings.) For the most part, the resulting names do not at all resemble Chinese names. For example, the official version of “David Anderson” is Dàiwěi Āndésēn. An older approach, still in use outside the PRC, is to construct a valid Chinese name that suggests the foreign name phonetically. For example, “David Anderson” might be An Dàwèi. Sometimes, when a foreign surname has the same meaning as a Chinese surname, semantic suggestiveness is chosen over phonetic suggestiveness. For example, Wáng, a common Chinese surname, means “king,” so “Daniel King” might be rendered Wáng Dànián. Students in this course will be given both the official PRC phonetic equivalents of their names and Chinese-style names.