Topspeed_JPI/TS-V3/SRC/RS232.MOD

(* Release 3.10 *)
(*-------------------------------------------------------------------------*
*                                                                          *
*  RS232.MOD - COMMS Toolkit serial i/o                                    *
*                                                                          *
*  COPYRIGHT (C) 1988..1992 Clarion Software Corporation.                  *
*  All Rights Reserved                                                     *
*                                                                          *
*--------------------------------------------------------------------------*)

IMPLEMENTATION MODULE RS232;
(*%F _OS2*)
(* DOS Version *)
  (*# check(index=>off)*)
  IMPORT Lib,SYSTEM;

  CONST
    BuffSize            = 1024;
    LowWater            = BuffSize DIV 4;  (* Buffer Level when Rx is enabled *)
    HighWater           = LowWater * 3;    (* Buffer Level when Rx is disabled *)
    ICOCW2              = 20H;   (* int. controller op. control word 2 *)
    ICOCW1              = 21H;   (* int. controller op. control word 1 (mask) *)
    (* Intel 8250 register address offsets *)
    RBR                 = 0;  (* receive buffer register *)
    THR                 = 0;  (* transmitter holding register *)
    DLL                 = 0;  (* divisor latch low (least significant) *)
    DLM                 = 1;  (* divisor latch high (most significant) *)
    IER                 = 1;  (* interrupt enable register *)
    IIR                 = 2;  (* interrupt identification register *)
    LCR                 = 3;  (* line control register *)
    MCR                 = 4;  (* modem control register *)
    LSR                 = 5;  (* line status register *)
    MSR                 = 6;  (* modem status register *)

  TYPE
    StopStart           = (Stop,Start);
    RingBuffer          = RECORD
                            rptr,wptr  : CARDINAL;
                            Buff       : ARRAY[0..BuffSize-1] OF CHAR;
                          END;

  VAR
(*# save, data(volatile=>on)*)  (* Modified asyncronously - so dont keep in registers! *)
    TxIdle,NoTx         : BOOLEAN;
    RxBuff,TxBuff       : RingBuffer;
    RxCount             : CARDINAL; (* a count of the chars currently in the Rx buffer *)
(*# restore *)
    FlowCtrlType        : FlowControls;
    Installed,
    DCD,CTS,Dummy       : BOOLEAN;
    OldVector           : FarADDRESS;
    Continue            : PROC;

(*.............................................*)

  PROCEDURE Pause():BOOLEAN;
    BEGIN
      (* This procedure just wastes a little time so that chips have a   *)
      (* little time to recover between IO calls.                        *)
      RETURN TRUE; (* do something so that the compiler doesnt optimise  *)
    END Pause;     (* this procedure out!                                *)

(*.............................................*)

  PROCEDURE GetVector(Int:WORD):FarADDRESS;
    VAR
      r                 : SYSTEM.Registers;
    BEGIN
      r.AH := 35H;
      r.AL := BYTE(Int);
      Lib.Intr(r,21H);      (* DOS Interrupt *)
      RETURN [r.ES:r.BX];
    END GetVector;

  PROCEDURE SetVector(Int:WORD;Addr:FarADDRESS);
    VAR
      r                 : SYSTEM.Registers;
    BEGIN
      r.AH := 25H;
      r.AL := BYTE(Int);
      r.DS := SYSTEM.Seg(Addr^);
      r.DX := SYSTEM.Ofs(Addr^);
      Lib.Intr(r,21H);     (* DOS Interrupt *)
    END SetVector;

  PROCEDURE SelectPort(Port:PortNos);
    BEGIN
      IF Installed THEN
        UnInstall;
      END; (*IF*)
      CASE Port OF
        1               : Base:=3F8H;
                          IntLevel:=4; |
        2               : Base:=2F8H;
                          IntLevel:=3; |
        3               : Base:=3E8H;
                          IntLevel:=4; |
        4               : Base:=2E8H;
                          IntLevel:=3; |
      END;
    END SelectPort;

(*.............................................*)

  PROCEDURE InitPort(Baud:CARDINAL;DataBits:Bits;StopBits:Stops;Parity:ParityCodes);
    VAR
      Divisor           : CARDINAL;
      LCRValue          : SHORTCARD;
    BEGIN
      SYSTEM.Out(Base+LCR,80H);    (* turn on DLAB to access the divisor *)
      Divisor := CARDINAL(115200 DIV LONGCARD(Baud)); (* set the divisor *)
      SYSTEM.Out(Base+DLL,SHORTCARD(Divisor MOD 256));
      SYSTEM.Out(Base+DLM,SHORTCARD(Divisor DIV 256));
      (* turn off the DLAB and set the new comm. parameters *)
      LCRValue := SHORTCARD(ORD(Parity)*8+(StopBits-1)*4+(DataBits-5));
      SYSTEM.Out(Base+LCR,LCRValue);
      DCD := 7 IN BITSET(CARDINAL(SYSTEM.In(Base+MSR)));
      Dummy := Pause();
      CTS := 4 IN BITSET(CARDINAL(SYSTEM.In(Base+MSR)));
    END InitPort;

(*.............................................*)

  PROCEDURE TxInt;
    VAR
      tmp               : CARDINAL;
    BEGIN
      WITH TxBuff DO
        IF (rptr=wptr) OR (NoTx) THEN
          TxIdle := TRUE
        ELSE
          TxIdle := FALSE;
          tmp := rptr;
          rptr := (rptr+1) MOD BuffSize;
          SYSTEM.Out(Base+THR,SHORTCARD(Buff[tmp]));
        END;
      END;
    END TxInt;

(*.............................................*)

  PROCEDURE SetFlowControl(Which:FlowControls);
    BEGIN
      FlowCtrlType := Which;
      IF Which=RtsCts THEN
        NoTx := NOT CTS;
      ELSE
        NoTx := FALSE;
      END;
      IF TxIdle THEN
        TxInt
      END;
    END SetFlowControl;

(*.............................................*)

  PROCEDURE ControlFlow(Which:StopStart);
    VAR
      Ch                : CHAR;
    BEGIN
      IF FlowCtrlType=XonXoff THEN
        IF Which=Stop THEN
          Ch:=XOFF
        ELSE
          Ch:=XON
        END;
        SerialWrite(Ch,1);
      ELSIF FlowCtrlType=RtsCts THEN
        IF Which=Stop THEN
          Ch:=CHR(09H)
        ELSE
          Ch:=CHR(0BH)
        END;
        SYSTEM.Out(Base+MCR,SHORTCARD(Ch));
      END;
    END ControlFlow;

(*.............................................*)

(*# save, call(interrupt=>on, reg_saved=>(ax,bx,cx,dx,si,di,ds,es,st1,st2),reg_param=>(),same_ds=>off)*)
(* NB, The interrupt pragma sets up the registers as parameters to the   *)
(*     procedure in the order defined below.  This allows easy access to *)
(*     the entry registers.                                              *)
  PROCEDURE SerialInt;
    VAR
      c                 : CHAR;
      IIRReg            : SHORTCARD;
      i                 : CARDINAL;
      b,pic             : BITSET;
    BEGIN
      (* Disable serial ints at the interrupt controller *)
      pic := BITSET(SYSTEM.In(ICOCW1));
      INCL(pic,IntLevel);
      SYSTEM.Out(ICOCW1,SHORTCARD(pic));
      SYSTEM.EI; (* now that serial ints are disabled we can allow other int types *)
      LOOP
        IIRReg := SYSTEM.In(Base+IIR);
        IF ODD(IIRReg) THEN
          EXIT;
        END;
        CASE IIRReg DIV 2 OF
          0             : (* Modem Status - get CTS *)
                          b := BITSET(SYSTEM.In(Base+MSR));
                          IF 0 IN b THEN (* CTS has changed state *)
                            CTS := (4 IN b);
                            IF FlowCtrlType=RtsCts THEN
                              NoTx := (NOT CTS);
                              IF TxIdle THEN
                                TxInt;
                              END;
                            END;
                          END;
                          IF 3 IN b THEN (* DCD has changed state *)
                            DCD := (7 IN b);
                          END;                                            |
          1             : (* TxReady *)
                          TxInt;                                          |
          2             : (* RxReady *)
                          c := CHAR(SYSTEM.In(Base));
                          IF ((c=XOFF) OR (c=XON)) AND (FlowCtrlType=XonXoff) THEN
                            NoTx := (c=XOFF);
                            IF TxIdle THEN
                              TxInt;
                            END;
                          ELSE
                            WITH RxBuff DO
                              Buff[wptr] := CHAR(SYSTEM.In(Base));
                              wptr := (wptr+1) MOD BuffSize;
                            END;
                            SYSTEM.DI;
                            INC(RxCount);
                            SYSTEM.EI;
                            IF RxCount=HighWater THEN
                              ControlFlow(Stop);
                            END;
                          END;                                            |
          3             : (* Rx Line Status - check for error and clear *)
                          b := BITSET(SYSTEM.In(Base+LSR));
                          b := BITSET(SYSTEM.In(Base));
                          (* clear rcv reg also *)                        |
        END;
      END;
      EXCL(pic,IntLevel);  (* reenable serial ints at the int controller *)
      SYSTEM.Out(ICOCW1,SHORTCARD(pic));
      SYSTEM.Out(ICOCW2,SHORTCARD(60H+IntLevel)); (* send specific EOI to 8259 *)
    END SerialInt;
(*# restore *)

(*.............................................*)

  PROCEDURE Install;
    VAR
      x,IIRReg          : SHORTCARD;
      b                 : BITSET;
    BEGIN
      UnInstall;
      SYSTEM.DI;
      SYSTEM.Out(Base+IER,0);   (* disable serial ints while we set things up. *)
      SYSTEM.EI;
      SetVector(IntLevel+8,FarADR(SerialInt));
      RxBuff.rptr := 0;   (* initialise ring buffer pointers & other vars *)
      RxBuff.wptr := 0;
      TxBuff.rptr := 0;
      TxBuff.wptr := 0;
      RxCount     := 0;
      TxIdle      := TRUE;
      NoTx        := FALSE;
      SYSTEM.Out(Base+MCR,10H); (* put 8250 UART into loopback mode *)
      REPEAT
        b := BITSET(SYSTEM.In(Base+LSR)); (* wait for tx path to empty *)
      UNTIL (6 IN b);
      WHILE ODD(SYSTEM.In(Base+LSR)) DO (* clear out rx path *)
        x := SYSTEM.In(Base);
      END;
      Dummy := Pause();
      SYSTEM.Out(Base+IER,0FH); (* enable all four types of serial interrupt *)
      Dummy := Pause();
      SYSTEM.Out(Base+MCR,0BH); (* Raise DTR,RTS and OUT2 *)
      Dummy := Pause();
      LOOP
        Dummy := Pause();
        (* force reads from int. identification reg until it clears *)
        IIRReg := SYSTEM.In(Base+IIR);
        IF ODD(IIRReg) THEN
          EXIT;
        END;
        CASE IIRReg DIV 2 OF
          0             : x:=SYSTEM.In(Base+MSR);                         |
          1             : (* TxIdle -- ignore *)                          |
          2             : x:=SYSTEM.In(Base);                             |
          3             : (* Rx Line Status *)
                          x:=SYSTEM.In(Base+LSR);
                          x:=SYSTEM.In(Base);                             |
        END;
      END;
      DCD := 7 IN BITSET(CARDINAL(SYSTEM.In(Base+MSR)));
      Dummy := Pause();
      CTS := 4 IN BITSET(CARDINAL(SYSTEM.In(Base+MSR)));
      NoTx := (NOT CTS) AND (FlowCtrlType=RtsCts);
      (* Enable level 4 or level 3 interrupt in interrupt controller *)
      b := BITSET(SYSTEM.In(ICOCW1));
      EXCL(b,IntLevel);
      Dummy := Pause();
      SYSTEM.Out(ICOCW1,SHORTCARD(b));
      Dummy := Pause();
      SYSTEM.Out(ICOCW2,SHORTCARD(IntLevel)+60H); (* EOI to int controller to clr it *)
      Installed := TRUE;
    END Install;

(*.............................................*)

  PROCEDURE CarrierDetect():BOOLEAN;
    BEGIN
      RETURN DCD;
    END CarrierDetect;

(*.............................................*)

  PROCEDURE UnInstall;
    VAR
      b                 : BITSET;
    BEGIN
      (* Disable level 4 or level 3 interrupt in interrupt controller *)
      b := BITSET(SYSTEM.In(ICOCW1));
      INCL(b,IntLevel);
      Dummy := Pause();
      SYSTEM.Out(ICOCW1,SHORTCARD(b));
      Dummy := Pause();
      SYSTEM.Out(Base+IER,0); (* Disable interrupt from 8250 *)
      Dummy := Pause();
      SYSTEM.Out(Base+MCR,0); (* drop DTR and RTS *)
      SetVector(IntLevel+8,OldVector);
      Installed := FALSE;
    END UnInstall;

(*.............................................*)

(*# save,call(o_a_copy=>off)*)
  PROCEDURE SerialWrite(b:ARRAY OF CHAR; Lnth:CARDINAL);
    VAR
      c                 : CHAR;
      i,neww            : CARDINAL;
    BEGIN
      IF Hooked THEN
        TxHook(b,Lnth);
      END; (*IF*)
      i:=0;
      WHILE i<Lnth DO
        c := b[i];
        WITH TxBuff DO
          neww := (wptr+1) MOD BuffSize;
          WHILE (neww=rptr) DO
            (* wait if buffer is about to overflow *)
          END;
          Buff[wptr] := c;
          wptr := neww;
        END;
        IF TxIdle THEN
          TxInt;
        END;
        INC(i);
      END;
    END SerialWrite;
(*# restore *)

(*.............................................*)

  PROCEDURE SerialRead(VAR c:CHAR; t:CARDINAL):BOOLEAN;
    VAR
      t2                : CARDINAL;
    BEGIN
      WITH RxBuff DO
        IF (t>0) AND (rptr=wptr) THEN
          (* if t>0 then wait "t" tenth/secs for char to arrive *)
          WHILE (rptr=wptr) AND (t>0) DO
            t2:=50;
            WHILE (rptr=wptr) AND (t2>0) DO
              Lib.Delay(2);
              DEC(t2);
            END;
            DEC(t);
          END;
        END;
        IF Hooked THEN
          RxHook(c);
        END; (*IF*)
        IF rptr=wptr THEN
          RETURN FALSE;
        ELSE
          c := Buff[rptr];
          rptr := (rptr+1) MOD BuffSize;
          SYSTEM.DI;
          DEC(RxCount);
          SYSTEM.EI;
          IF RxCount=LowWater THEN
            ControlFlow(Start);
          END;
          RETURN TRUE
        END;
      END;
    END SerialRead;

(*.............................................*)

  PROCEDURE FlushInBuf;
    BEGIN
      SYSTEM.DI;
      RxBuff.rptr := 0;
      RxBuff.wptr := 0;
      SYSTEM.EI;
    END FlushInBuf;

(*.............................................*)

  PROCEDURE SetBreak(Tenths:CARDINAL);
    VAR
      b                 : BITSET;
    BEGIN
      b := BITSET(SYSTEM.In(Base+LCR));
      Dummy := Pause();
      SYSTEM.Out(Base+LCR,SHORTCARD(b+{6}));
      Lib.Delay(Tenths*100);
      SYSTEM.Out(Base+LCR,SHORTCARD(b));
    END SetBreak;

(*.............................................*)

  PROCEDURE AddTxHook(Hook:TxHookProc;VAR OldHook:TxHookProc);
    BEGIN
      OldHook := TxHook;
      TxHook := Hook;
    END AddTxHook;

  PROCEDURE AddRxHook(Hook:RxHookProc;VAR OldHook:RxHookProc);
    BEGIN
      OldHook := RxHook;
      RxHook := Hook;
    END AddRxHook;

  PROCEDURE TermProc;
    BEGIN
      UnInstall();
      Continue();
    END TermProc;

(*................................................*)

  BEGIN (*RS232*)
    Base := 3F8H;
    IntLevel := 4;
    FlowCtrlType := RtsCts;
    OldVector := GetVector(IntLevel+8);
    Lib.Terminate(TermProc,Continue);
    Hooked := FALSE;
    RxHook := NULLPROC;
    TxHook := NULLPROC;
    Installed := FALSE;
  END RS232.
(*%E*)
(*%T _OS2*)
(* OS/2 version *)
  IMPORT Dos;

  TYPE
    Byte                = SHORTCARD[0..7];
    ByteSet             = SET OF BYTE;
    DCBType             = RECORD
                            write,read : CARDINAL;
                            flag1,flag2,
                            flag3      : ByteSet;
                            error,break,
                            xon,xoff   : CHAR;
                          END;

  VAR
    PortNum             : CARDINAL;
    Handle              : CARDINAL;
    CurrBaud            : CARDINAL;
    CurrData            : Bits;
    CurrStop            : Stops;
    CurrParity          : ParityCodes;
    CurrFlow            : FlowControls;
    CurrTime            : CARDINAL;
    Locked,Installed    : BOOLEAN;
    Null                : FarADDRESS;

  PROCEDURE SelectPort(Port:PortNos);
    BEGIN
      IF NOT Locked THEN
        IF Installed THEN
          UnInstall;
        END; (*IF*)
        PortNum := Port;
      END;
    END SelectPort;

  PROCEDURE InitPort2;
    TYPE
      ParsType          = ARRAY ParityCodes OF SHORTCARD;
    CONST
      Pars              = ParsType(0,1,0,2,0,3,0,4);
    VAR
      char              : RECORD
                            data,
                            parity,
                            stop       : SHORTCARD;
                          END;
    BEGIN
      Dos.DevIOCtl(Null,FarADR(CurrBaud),41H,1,Handle);
      WITH char DO
        data := SHORTCARD(CurrData);
        parity := Pars[CurrParity];
        IF CurrStop = 2 THEN
          stop := 2;
        ELSE
          stop := 0;
        END;
      END;
      Dos.DevIOCtl(Null,FarADR(char),42H,1,Handle);
    END InitPort2;

  PROCEDURE InitPort(Baud:CARDINAL;DataBits:Bits;StopBits:Stops;Parity:ParityCodes);
    BEGIN
      IF NOT Locked THEN
        CurrBaud := Baud;
        CurrData := DataBits;
        CurrStop := StopBits;
        CurrParity := Parity;
        IF Handle # MAX(CARDINAL) THEN
          InitPort2;
        END;
      END;
    END InitPort;

  PROCEDURE SetFlowControl(Which:FlowControls);
    VAR
      dcb               : DCBType;
    BEGIN
      IF NOT Locked THEN
        CurrFlow := Which;
        IF Handle # MAX(CARDINAL) THEN
          Dos.DevIOCtl(FarADR(dcb),Null,73H,1,Handle);
          WITH dcb DO
            EXCL(flag2,7);
            INCL(flag2,6);
            EXCL(flag2,1);
            EXCL(flag2,0);
            CASE Which OF
              NoFlowControl : ; (* already set *)          |
              RtsCts        : INCL(flag2,7);
                              EXCL(flag2,6);               |
              XonXoff       : INCL(flag2,1);
                              INCL(flag2,0);               |
            END;
          END;
          Dos.DevIOCtl(Null,FarADR(dcb),53H,1,Handle);
        END;
      END;
    END SetFlowControl;

  PROCEDURE SetRdTime(time:CARDINAL);
    VAR
      dcb               : DCBType;
    BEGIN
      Dos.DevIOCtl(FarADR(dcb),Null,73H,1,Handle);
      WITH dcb DO
        INCL(flag3,1);
        IF time = 0 THEN
          INCL(flag3,2);
          read := 0;
        ELSE
          IF time = MAX(CARDINAL) THEN
            read := 0;
          ELSE
            read := time*10-1;
          END;
          EXCL(flag3,2);
        END;
      END;
      Dos.DevIOCtl(Null,FarADR(dcb),53H,1,Handle);
      CurrTime := time;
    END SetRdTime;

  PROCEDURE SetWrTime(time:CARDINAL);
    VAR
      dcb               : DCBType;
    BEGIN
      Dos.DevIOCtl(FarADR(dcb),Null,73H,1,Handle);
      WITH dcb DO
        IF time = 0 THEN
          INCL(flag3,0);
        ELSE
          IF time = MAX(CARDINAL) THEN
            write := 0;
          ELSE
            write := time*10-1;
          END;
          EXCL(flag3,0);
        END;
      END;
      Dos.DevIOCtl(Null,FarADR(dcb),53H,1,Handle);
    END SetWrTime;

  PROCEDURE UnInstall2;
    VAR
      tmp               : CARDINAL;
    BEGIN
      IF Handle # MAX(CARDINAL) THEN
        tmp := Handle;
        Handle := MAX(CARDINAL);
        SetRdTime(MAX(CARDINAL));
        SetWrTime(MAX(CARDINAL));
        Dos.Close(tmp);
      END;
    END UnInstall2;

  PROCEDURE Install;
    TYPE
      NamesType         = ARRAY PortNos OF ARRAY[0..4] OF CHAR;
    CONST
      Names             = NamesType('COM1'+0C,'COM2'+0C,'COM3'+0C,'NUL'+0C);
    VAR
      r                 : CARDINAL;
      a                 : CARDINAL;
    BEGIN
      Dos.EnterCritSec();
      IF NOT Locked THEN
        Locked := TRUE;
        Dos.ExitCritSec();
        UnInstall2;
        r := Dos.Open(Names[PortNum],Handle,a,0,0,1,CARDINAL({13,7,4,1}),0);
        IF r = 0 THEN
          InitPort2;
          SetFlowControl(CurrFlow);
          SetRdTime(MAX(CARDINAL));
          SetWrTime(600);
          Installed := TRUE;
        ELSE
          Handle := MAX(CARDINAL);
        END;
        Locked := FALSE;
      ELSE
        Dos.ExitCritSec();
      END;
    END Install;

  PROCEDURE CarrierDetect():BOOLEAN;
    VAR
      r                 : CARDINAL;
      mcis              : ByteSet;
    BEGIN
      IF NOT Locked AND (Handle # MAX(CARDINAL)) THEN
        r := Dos.DevIOCtl(FarADR(mcis),Null,67H,1,Handle);
        RETURN (r = 0) AND (7 IN mcis);
      ELSE
        RETURN FALSE;
      END;
    END CarrierDetect;

  PROCEDURE UnInstall;
    VAR
      tmp               : CARDINAL;
    BEGIN
      Dos.EnterCritSec();
      IF NOT Locked THEN
        Locked := TRUE;
        Dos.ExitCritSec();
        UnInstall2;
        Locked := FALSE;
        Installed := FALSE;
      ELSE
        Dos.ExitCritSec();
      END;
    END UnInstall;

(*# save, call(o_a_copy => off), check(index=>off) *)
  PROCEDURE SerialWrite(b:ARRAY OF CHAR; Lnth:CARDINAL);
    VAR
      cnt,pos           : CARDINAL;
    BEGIN
      IF NOT Locked AND (Handle # MAX(CARDINAL)) THEN
        IF Hooked THEN
          TxHook(b,Lnth);
        END; (*IF*)
        pos := 0;
        WHILE Lnth-pos # 0 DO
          Dos.Write(Handle,FarADR(b[pos]),Lnth-pos,cnt);
          INC(pos,cnt);
        END;
      END;
    END SerialWrite;
(*# restore *)

  PROCEDURE SerialRead(VAR c:CHAR; t:CARDINAL):BOOLEAN;
    VAR
      r                 : CARDINAL;
      len               : CARDINAL;
    BEGIN
      IF NOT Locked AND (Handle # MAX(CARDINAL)) THEN
        IF t # CurrTime THEN
          SetRdTime(t);
        END;
        r := Dos.Read(Handle,FarADR(c),1,len);
        IF Hooked THEN
          RxHook(c);
        END; (*IF*)
        RETURN (r = 0) AND (len # 0);
      ELSE
        RETURN FALSE;
      END;
    END SerialRead;

  PROCEDURE FlushInBuf;
    VAR
      Return            : RECORD
                            Chars,
                            QSize      : CARDINAL;
                          END; (*RECORD*)
      i                 : CARDINAL;
      void              : ARRAY[0..128] OF BYTE;
    BEGIN
      Dos.DevIOCtl(FarADR(Return),Null,68H,1,Handle);
      WHILE Return.Chars > 0 DO
        IF Return.Chars > SIZE(void) THEN
          i := SIZE(void);
        ELSE
          i := Return.Chars;
        END; (*IF*)
        Dos.Read(Handle,FarADR(void),i,i);
        DEC(Return.Chars,i);
      END; (*WHILE*)
    END FlushInBuf;

  PROCEDURE SetBreak(Tenths:CARDINAL);
    VAR
      err               : CARDINAL;
    BEGIN
      IF NOT Locked AND (Handle # MAX(CARDINAL)) THEN
        Dos.DevIOCtl(FarADR(err),Null,4BH,1,Handle);
        Dos.Sleep(VAL(LONGCARD,Tenths)*100);
        Dos.DevIOCtl(FarADR(err),Null,45H,1,Handle);
      END;
    END SetBreak;

  PROCEDURE AddTxHook(Hook:TxHookProc;VAR OldHook:TxHookProc);
    BEGIN
      OldHook := TxHook;
      TxHook := Hook;
    END AddTxHook;

  PROCEDURE AddRxHook(Hook:RxHookProc;VAR OldHook:RxHookProc);
    BEGIN
      OldHook := RxHook;
      RxHook := Hook;
    END AddRxHook;


  BEGIN (*RS232*)
    Handle := MAX(CARDINAL);
    CurrBaud := 1200;
    CurrData := 8;
    CurrStop := 1;
    CurrParity := None;
    CurrFlow := RtsCts;
    Locked := FALSE;
    Null := FarNIL;
    SelectPort(1);
    Hooked := FALSE;
    RxHook := NULLPROC;
    TxHook := NULLPROC;
    Installed := FALSE;
  END RS232.
(*%E*)