Topspeed_JPI/TS-V3/SRC/R_EMUL.A

(* Release 3.10 *)
(*-------------------------------------------------------------------------*
*                                                                          *
*  R_EMUL.A - real-mode emulator support                                   *
*                                                                          *
*  COPYRIGHT (C) 1989..1992 Clarion Software Corporation.                  *
*  All Rights Reserved                                                     *
*                                                                          *
*--------------------------------------------------------------------------*)

module r_emul

auto_select = 1  (* use 8087 if one is present at run time *)
emInt = 34H

public  FIDRQQ   =  05C32H
public  FIWRQQ   =  0A23DH

public  FIERQQ   =  01632H
public  FIARQQ   =  0FE32H
public  FISRQQ   =  00632H
public  FICRQQ   =  00E32H

public  FJERQQ  =  00000H
public  FJARQQ  =  04000H
public  FJSRQQ  =  08000H
public  FJCRQQ  =  0C000H

public  FIXRQQ  =  0

segment EMU_INITSTATE(FAR_DATA,68H)

originalVectors : org 4*10
temp87          : org 2
entryChoice     : org 4
currentInt      : org 1

segment _BSS(BSS, 28H)

ExecFloatState  : org 94

segment EMU_TEXT  (EMU_CODE,28H)

(*%T auto_select*)
(*INCLUDE E087ENTR.ASM*)

(*   We arrive here due to any one of nine emulation interrupts, 34H..3Ch.*)


(* save registers*)

(* { Obtain the instruction.*)

(*     Int-op  - NPX instruction  one of 8 different interrupts*)
(*     modrm  - mode register/memory  specifies what kind of operand*)
(* { optional }*)
(*     offset  - byte/word    if modrm requires an offset*)

(*   The total can be from 3 to 5 bytes.  Upon arrival the old cs:IP points to*)
(*   the third byte.*)


emInt  =  34H

(*callFrame  STRUC*)    (* caller's stack top at time of stack swap*)
callBP    = 0
callCSIP  = 2
callFL    = 6

WaitEscCode =  0D89BH    (* Wait, ESC ..*)
emIntCode   =  034CDH    (* Int  34H ..*)
waitCode    =  09BH
segfixCode  =  026H    (* es:*)
escCode     =  0D8H
nopWait     =  09B90H    (* nop, Wait*)


e087_Entry  :

  push bp
  mov  bp, sp
  push ax
  push si
  push ds

(*Not worth enabling interrupts*)
(*test  [bp].callFL[by1], 02  ; interrupts enabled ?*)
(*jz  sameInterrupts*)
(*  sti      ; interrupt enable same as caller had*)
(*sameInterrupts:*)

  lds  si, [bp][callCSIP]

  mov  ax, [si][-1]  (* "nn" byte of Int + next byte*)

  sub  al, emInt
  cmp  al, 8
  jnb  ninthFormat

  sub  si, 2
  add  word [si], WaitEscCode - emIntCode

retryExit:
  mov  [bp][callCSIP], si    (* retry the instruction*)
  jmp  e087_exit


(* supplement byte will be*)
(* - mod/r/m byte  if one of the 8 default (no-segfix) interrupts*)
(* - segfix + opcode  if 9th interrupt AND supplement.bit5*)
(* - function number  if 9th AND NOT supplement.bit5*)

ninthFormat:
  ja  maybeTenth

  test  ah, 20H
  jnz  unknownFunction1

(* we need to patch to create <wait, segfix, ESCnn>*)

  sub  si, 2
  mov  [bp][callCSIP], si    (* retry begins at Wait*)

  mov  byte [si], waitCode
  inc  si

  mov  al, ah
  and  ax, 07C0H    (* ESC number in AH, seg number in AL*)
  shr  al, 1
  shr  al, 1      (* align the segment number*)
  shr  al, 1
  xor  al, 18H      (* fix the peculiar Microsoft order*)
  add  ax, segfixCode + (escCode * 256)
  mov  [si], ax

e087_exit:
  pop  ds
  pop  si
  pop  ax
  pop  bp
  iret

maybeTenth:
  cmp  al, 9
  ja  unknownFunction1

  sub  si, 2
  mov  word [si], nopWait
  jmp  retryExit


unknownFunction1:

(*  your choice of code to go here !*)

  jmp  e087_exit
(*%E*)


extrn emulate8087

oldFlags        = 22
oldCS           = 20
oldIP           = 18
oldAX           = 16
oldBX           = 14
oldBX           = 12
oldDX           = 10
oldSI           = 8
oldDI           = 6
oldDS           = 4
oldES           = 2
oldBP           = 0

e086_entry :
  sti
  push  ax
  push  bx
  push  cx
  push  dx
  push  si
  push  di
  push  ds
  push  es
  push  bp
  mov   bp,sp
  cld   (* forward string direction *)
  lds  si, [bp][oldIP]
  dec  si         (* move back to inspect Int nn instruction *)
  mov  cx, si     (* remember original IP *)
  sub  dl, dl     (* records whether there was a segment override *)
  lodsw
  sub al, emInt
  cmp al, 8
  jae unusual
decoded:
  jmp emulate8087
resume:
(* ggfb: check for another float instruction *)
  lds  si, [bp][oldIP]
  cmp byte ds:[si], 0CDH
  jne notanother
  inc si
  sub  dl, dl     (* records whether there was a segment override *)
  cld             (* !! it may not be clear! *)
  lodsw
  sub  al, emInt
  cmp  al, 8
  jb   decoded (* ax,dl,bp,si must all be valid *)
  je   override
notanother:
  mov  sp, bp
  pop  bp
  pop  es
  pop  ds
  pop  di
  pop  si
  pop  dx
  pop  cx
  pop  bx
  pop  ax
  iret

unusual:
  ja  iswait
override:
  mov  al, ah
  and  al, 0C0H
  jz  DSfix
  cmp  al, 0C0H
  je  ESfix
  cmp  al, 080H
  je  CSfix
  (*jmp SSfix*)
SSfix: mov  di, ss; jmp segfix
CSfix: mov  di, ds; jmp segfix
ESfix: mov  di, [bp][oldES]; jmp segfix
DSfix: mov  di, [bp][oldDS]; (*jmp segfix*)
segfix:
  mov es, di
  lodsb      (* advance to pick up mod/r/m byte *)
  xchg  ah, al
  and  al, 7
  inc dl
  jmp decoded

iswait:
  mov  word [si][-3], 9090H    (* patch with no-ops *)
  jmp  resume


EmuInit: db 0
public __FloatInit:

(* Initialise EMU_INITSTATE *)

 push bp
 mov  bp, sp
 sub  sp, 2
 extrn __fp_1
 call far __fp_1

 push ds
 mov ax,EMU_INITSTATE
 mov ds,ax

(* First check to see if a real 8087/287 is available.  That allows us to*)
(* select which version of NDP support is to remain resident.*)

 db 0DBH, 0E3H (*finit*)
 mov word ds:[temp87], -1

 mov cx,400H
here2:
 loop here2 (*FWAIT*)

 db 0DDH,03EH; dw temp87; (*FSTSW   temp87*)
 mov cx,400H
here:
 loop here (*FWAIT*)
 cmp byte ds:[temp87], 0

(*%T auto_select*)
 mov ax, e087_Entry
 jz installSupporter (* --- disable this for debugging ---*)
(*%E*)

 extrn @Save8087
 mov ax, seg @Save8087
 mov es, ax
 mov byte es:[@Save8087], 0
 mov ax, e086_entry

installSupporter:
 mov word ds:[entryChoice], ax
 mov word ds:[entryChoice][2], EMU_TEXT

(* Set the emulation interrupt vectors to point to their handlers.*)

doCapture:
 mov byte ds:[currentInt], emInt
 mov cx, 10   (* there are 10 vectors*)
 mov di, originalVectors

rememberLoop:

(* Remember earlier use of vector.  They must be replaced when the program*)
(* terminates.*)

 mov al, ds:[currentInt]
 mov ah, 35H    (* read interrupt vector*)
 int 21H        (* results in es:bx*)

 mov ds:[di][0], bx
 mov ds:[di][2], es
 add di, 4

 inc byte ds:[currentInt]

 loop rememberLoop

(* Now take over the vectors.*)

 mov byte ds:[currentInt], emInt
 mov cx, 10   (* there are 10 vectors*)
 mov di, ds:[entryChoice][2]

captureLoop:

 push ds
 mov dx, ds:[entryChoice]
 mov al, ds:[currentInt]
 mov ds, di
 mov ah, 25H   (* set interrupt vector*)
 int 21H   (* with value in ds:dx*)
 pop ds

 inc byte ds:[currentInt]
 loop captureLoop
 mov  byte cs:[EmuInit], 1

 pop ds
 mov bx, ss
 jmp misProlog
 (*call __FloatInitInstance*)
 (*ret far 0*)

public __FloatInitInstance:

 push bp
 mov  bp, sp
 sub  sp, 2
misProlog:
 push ax
 mov ax, resume
 extrn __EmulInitInstance
 call __EmulInitInstance
 pop  ax
 cmp  byte cs:[EmuInit], 1
 jne  abort

 finit
 fstcw [bp][-2]
 fwait
 or  word [bp][-2], 0C00H
 and word [bp][-2],~001DH (* enable invalid op/underflow/overflow/divide by zero exception *)
 fldcw [bp][-2]
 extrn __FloatInitStack
 call far __FloatInitStack
 mov sp,bp
 pop bp
abort:
 ret far 0

public __FloatFinish:

 push bp
 mov  bp, sp
 mov ax,EMU_INITSTATE
 mov ds,ax

 mov byte ds:[currentInt], emInt
 mov cx, 10   (* there are 10 vectors*)
 mov bx, originalVectors

restoreLoop:

 push ds

 mov dx, [bx]
 mov al, ds:[currentInt]
 mov ds, [bx][2]
 mov ah, 25H   (* set interrupt vector*)
 int 21H       (* with value in ds:dx*)

 pop ds

 add bx, 4
 inc byte ds:[currentInt]

 loop restoreLoop

 pop  bp
 ret far 0

public __FloatEmulNMI:
  extrn __sigFp
  jmp far __sigFp

public __FloatMathExcepDos :
  (*
     the stack contains a FAR return address to signal handler, then
     the far address of the point of exception, then the iret flags
  *)
  push ax              (* make room for status word *)
  push bp
  mov bp,sp
  push  ax
  mov   ax,[bp][4]     (* return ip *)
  mov   [bp][2],ax
  mov   ax,[bp][6]     (* return cs *)
  mov   [bp][4],ax
  fstsw [bp][6]        (* will bring in emulator ! *)
  pop   ax
  pop   bp
  fclex
  extrn __math_excep
  jmp far __math_excep


public __FloatJmpSave :

st1_reg = 20
st2_reg = 30

    push bp
    mov  bp, sp
    fld st(0), st(1)
    fstp  tbyte es:[di][st1_reg], st(0)
    fld st(0), st(2)
    fstp  tbyte es:[di][st2_reg], st(0)
    fwait
    pop  bp
    ret  far 0

public __FloatJmpRestore :

    push bp
    mov  bp, sp
    fld  tbyte st(0), ds:[si][st1_reg]
    fstp st(2), st(0)
    fld  tbyte st(0), ds:[si][st2_reg]
    fstp st(3), st(0)
    pop  bp
    ret  far 0

public __FloatExecSave :

    push bp
    mov  bp, sp
    push ax
    mov  ax, _BSS
    mov  es, ax
    fsave es:[ExecFloatState]
    pop  ax
    fwait
    pop  bp
    ret  far 0

public __FloatExecRestore :

    push bp
    mov  bp, sp
    push ax
    mov  ax, _BSS
    mov  es, ax
    frstor es:[ExecFloatState]
    pop  ax
    fwait
    pop  bp
    ret  far 0

ProcessFloat    = 14

public __FloatSave :

    push bp
    mov  bp, sp
    fsave es:[ProcessFloat]
    fwait
    pop  bp
    ret  far 0

public __FloatRestore :

    push bp
    mov  bp, sp
    frstor ds:[ProcessFloat]
    fwait
    pop  bp
    ret  far 0

segment EMU_STATE(DATA,68H)

emuRecSize = 490

select EMU_STATE

public emuBuffer:

db  0
org emuRecSize-1

end (*R_EMUL.A*)